Plan mark-up
Draw services over BYDA plans, site plans and aerial imagery on a tablet, in your paint colours.
Service locators: the report's done before the paint dries. Mark it, map it, send it.
Mark-ups sketched on the back of BYDA plans, photos sorted at night and reports sent days after the paint's gone down. We build locate reporting, job booking and client portal systems for service locators. They turn what you find on site into a clear, mapped report before the receiver goes back in the ute. Then we host them and look after them.
A locate is only as good as the record it leaves behind. The paint fades after the first rain, the dig crew pulls the flags out and six months later the only proof of what you found is a blurry photo and a sketch on a crumpled BYDA plan. Most locators mark up by hand on site. Then they rebuild the whole thing in Word, Paint or CAD back at the office, usually after dinner.
Wollopit builds custom service locating software around how your techs actually work. Requests come in with the BYDA pack already attached. Techs mark up services on a tablet, log depth, method and quality level against every line and pin photos and GPS points where they belong. The report is built on site and lands with the client and the dig crew before you've left the carpark. We connect the gear and tools you already use, then look after the lot on our own servers.
What we hear from service locators
Most locators we talk to are brilliant with a receiver and a GPR cart. The trouble starts when the job finishes and the paperwork begins.
Solutions
Pick the one that's hurting most or join the whole lot up. Everything is built around how your team works, not the other way round.
Draw services over BYDA plans, site plans and aerial imagery on a tablet, in your paint colours.
Branded reports with the mark-up, service table, photos and disclaimers, built before you leave site.
GPS points from your phone or survey gear and photos pinned to every service and every pit.
Type, owner, depth, method, AS 5488 quality level and confidence logged per line.
Clients book locates online with site details, scope, BYDA referral and plans attached.
A job board for the team with travel, gear and tech skills matched to each job, plus SMS updates.
Asset owner responses filed per job with a checklist, expiry dates and missing replies flagged.
Builders and civil crews log in to book, track jobs and download every report for their sites.
Every locate you've ever done on a site layered on one map, so repeat jobs start ahead.
DXF, KML and shapefile exports so designers, surveyors and engineers can drop your findings straight in.
Receivers, GPR units and pipe cameras with calibration dates, plus tech licences and inductions.
SWMS, take 5s, permits and site inductions completed on the tablet and stored with the job.
Quotes from your rates, time on site captured in the field and invoices sent to Xero or MYOB.
Fast on phones, clear about what you locate and built to rank for 'service locator near me'.
The big ones
These are the systems service locators ask us about most. Each one works on its own and they get properly clever when they're joined up.
Locate reporting
Everything the tech records on the tablet flows into a clean, branded locate report. The marked-up plan, service table, depths, photos and warnings all sit in one document the client can actually read. Sign it off on site and it's on its way.
Field capture
Techs draw services over the BYDA plans and aerial imagery, then tag each one with type, depth, method and quality level. GPS points come from the phone or your survey gear. It works offline in basements and dead zones, then syncs when the signal comes back.
Booking & dispatch
Clients book through a form or their portal with the site, scope and BYDA referral up front. The office drops jobs onto a shared board and techs see the plans, access notes and gear list on their phone before they head off.
Client portal & site history
Builders, civil contractors and facility managers get their own login to book jobs, track progress and pull down any report. Every locate on a site layers onto one map, so the next job starts with what you already know.
Gear & compliance
Every receiver, GPR unit and pipe camera has its calibration date and service history on file. Tech licences and site inductions sit alongside them with reminders before anything lapses. SWMS and take 5s get done on the tablet and stored with the job.
Before and after
Here's how a typical pre-dig locate could change. Every locating business is different, so we map yours first.
Everything under one roof
Whether you're starting fresh or upgrading what you've got, it's one team from the first sketch to the support call.
Built around how your service locating business actually runs: plan mark-up, on-site locate reports and the admin in between, in one system you own.
Fast, hand-built websites that rank for the searches your customers make and turn visits into enquiries, bookings or orders.
Running on spreadsheets, old software or a platform you've outgrown? We move your data across and upgrade in stages so the business never stops.
GPS & photo capture and service records: customer and staff portals that work on any phone without an app store.
We connect Before You Dig Australia (BYDA), Radiodetection and Vivax-Metrotech so information moves on its own and nobody retypes it.
Managed hosting, updates, backups and security for your service locating business, looked after by the people who built it.
Connections
We connect to the gear and software you rely on, work alongside the job platforms you're happy with or replace the ones holding you back.
The process
We get properly below the surface of your service locating business: the systems, the busy days and the jobs everyone hates. Then we fix the bits that matter most first.
We ride along on a few locates and sit with the office, then work out where the hours disappear between the paint going down and the report going out.
We plan it before writing code: your services, report layout, quality levels, BYDA handling, gear, clients, hosting and cost.
Real engineering, shown to you early and often. Usually on-site reporting first, so your techs feel the win on their next job.
We host it, maintain it and keep improving it. When something breaks you call the people who built it.
FAQ
Something else on your mind? Ring 0423 011 252 and ask the people who'd build it.
Usually, yes. We bring BYDA plans into each job and take GPS points from your phone or survey gear. Where your receiver or GPR software exports data, we can pull that in too. Then we build the reporting around how your techs work.
Yes. Techs pick a quality level and method for each service and the report lays it out the same way every time, so clients know exactly what was traced, what was potholed and what came off records.
Yes. We can export your mark-ups and GPS points as DXF, KML or shapefiles so they drop straight into CAD or GIS.
Yes. We build the field side to work offline in basements, plant rooms and rural sites, then sync everything once the tablet finds signal again.
No. If your job platform is doing its job, we build around it and add the mark-up, reporting and client portal on top. If it's holding you back, we'll show you what replacing it would involve before anything changes.
It depends on what you need, so we quote up front once we understand it. No surprise invoices, no lock-in and you own what we build.
Smaller jobs like a branded on-site report can be quick. Bigger systems are planned in stages so you get the first win early instead of waiting for everything at once.
We do. We host it on our own managed servers and keep it updated, backed up and secure. When you need something you ring the people who built it.
Usually, yes. We keep what's working and upgrade the rest in stages. We move your data across, connect the old and new while we switch and retire the old system only when the new one is proven.
Contact
Tell us what's slow, broken, manual or missing. You don't need a spec, just describe what's going on.