wollopit Got a problem? →

Hydro excavation software: dig bookings & photo reports

Hydro excavation: bookings in, photo reports out. Every dig booked, logged and reported.

Bookings come in over the phone, BYDA plans get hunted down on site and dig sheets get scribbled on paper that ends up soaked in slurry. We build dig booking and reporting systems that get the right truck to the right site and get photo reports to the client before you've packed up. Then we host them and look after them.

Looking for hydro excavation booking and reporting software?

Non-destructive digging runs on tight bookings, site paperwork and proof of what you exposed. The client wants depths, photos and locations for every service. The principal contractor wants pre-starts, tickets and SWMS. Your office wants hours, tip runs and standby time so the invoice holds up. Most operators juggle all of it across phone calls, paper forms, camera rolls and a whiteboard in the yard.

Wollopit builds custom hydro excavation software around how your crews actually work. Bookings land with the site details already filled in. Plans and permits sit on the operator's phone. Each pothole gets its depths, services and photos logged on the spot, then a branded report goes to the client from site. Time and waste flow straight into Xero or MYOB. We connect the tools you already like, replace the ones holding you back and look after the lot on our own servers.

01The problems

What we hear from hydro excavation contractors

Does your hydro excavation company have these problems? Here's how we'd fix them.

Most hydro vac operators we talk to run brilliant trucks and skilled crews, then lose hours every week to phone tag, paperwork and arguing over the invoice.

  • The problemBookings by phoneJobs come in by call and text with half the details missing. Nobody asked about depth, access or how many holes.
    How we fix itAn online booking form that captures site address, number of potholes, depth, services expected, access and parking up front.
  • The problemPlans missing on siteCrews arrive without the BYDA plans, permits or site contact and spend the first hour on the phone.
    How we fix itBYDA plans, permits, site contacts and induction notes attached to the job on the operator's phone before they leave the yard.
  • The problemThe whiteboard is the scheduleUnits get double booked, the wrong size truck turns up and a last minute call-out throws the whole week out.
    How we fix itA drag-and-drop truck and operator board by day and location, showing unit size, tickets and what's already booked.
  • The problemPaper dig sheetsDepths and findings are written on forms that get wet, muddy and lost in the cab.
    How we fix itDigital dig sheets per pothole with depth, service type, material, condition and GPS location. Works offline with no reception.
  • The problemPhotos never matched upHundreds of photos sit on phones with no link to the hole they came from. The client wants them by tomorrow.
    How we fix itPhotos taken inside each pothole record, tagged with depth and location and dropped straight into the report.
  • The problemReports take a night to writeSomeone in the office copies dig sheets into Word and pastes photos in one at a time.
    How we fix itBranded photo dig reports built automatically from the dig sheets and sent to the client from site.
  • The problemTruck time argued overHours, travel, standby and minimum charges get disputed at invoice time with nothing to back them up.
    How we fix itTime on site, travel, standby and delays logged on the job with timestamps and client sign-off.
  • The problemWaste goes untrackedTip runs, slurry volumes and disposal dockets end up in the glovebox or lost entirely.
    How we fix itEvery tip run logged with volume, facility and a photo of the docket, ready for the invoice and your waste records.
  • The problemSafety checks on clipboardsPre-starts, SWMS and take 5s are signed on paper and hard to prove when the principal contractor asks.
    How we fix itPre-starts, SWMS and take 5s signed on the device, stored with the job and pulled up in seconds.
  • The problemTickets and inductions expireAn operator turns up to a tier one site with an expired ticket and gets sent home.
    How we fix itLicences, tickets and site inductions tracked per operator with expiry alerts before they lapse.
  • The problemTruck servicing missedPumps, blowers and chassis services slip because nobody's tracking engine or PTO hours.
    How we fix itService schedules by engine and PTO hours with defect reports from pre-starts going straight to the workshop.
  • The problemInvoices retypedDig sheets, timesheets and tip dockets get keyed into Xero by hand days after the job.
    How we fix itApproved jobs turn into invoices in Xero or MYOB with hours, waste and rates already on them.
02What we build

Solutions

What we build for hydro excavation contractors. Usually all talking to each other.

Pick the one that's hurting most or join the whole lot up. Everything is built around how your team works, not the other way round.

01

Online dig booking

Clients book digs with site, depth, services, access and preferred date in one form.

02

Truck & operator scheduling

Units and operators allocated by day, location and truck size on one shared board.

03

Job packs on the phone

BYDA plans, permits, site contacts and inductions waiting for the operator.

04

Digital dig sheets

Depths, services, materials and GPS location captured per pothole, even offline.

05

Photo dig reports

Branded reports with photos and depths sent to the client when the job's done.

06

Client portal

Builders and utilities see bookings, upcoming digs and every past report in one place.

07

Time & standby logging

Site hours, travel, standby and delays timestamped with client sign-off.

08

Waste & tip run tracking

Slurry volumes, disposal facilities and docket photos logged per load.

09

Safety & pre-starts

Vehicle pre-starts, SWMS and take 5s signed on the device and filed per job.

10

Tickets & inductions register

Operator licences, tickets and site inductions with expiry reminders.

11

Fleet maintenance

Service schedules by engine and PTO hours with defects sent to the workshop.

12

Invoicing to Xero or MYOB

Approved jobs become invoices with hours, waste and rates already on them.

13

SMS job updates

Clients get a text when the truck's on its way and when the report's ready.

14

A website that digs up work

Fast on mobile with online booking, built to rank for 'hydro excavation near me'.

03The systems

The big ones

Your whole hydro vac operation, on one system.

These are the systems hydro excavation contractors ask us about most. Each one works on its own and they get properly useful when they're joined up.

Bookings & scheduling

Every booking lands complete. Every truck knows where it's going.

Clients book online or your office enters the job once with everything the crew needs. The scheduling board shows every unit and operator by day so you can slot in an urgent call-out without wrecking the week.

  • Online booking form for clients
  • Site, depth, services and access captured
  • Drag-and-drop truck and operator board
  • Unit size and capability matching
  • Operator tickets checked on allocation
  • BYDA plans and permits attached
  • Recurring and multi-day jobs
  • SMS when the truck's on its way
  • Clash warnings for double bookings

Dig sheets & photo reports

The report's done before the hose is packed away.

Operators log each pothole on their phone with depth, service type, material and GPS location, then snap photos straight into that hole's record. When the job's done a branded report goes to the client from site.

  • Dig sheet per pothole
  • Depth to top of service and cover
  • Service type, size, material and condition
  • GPS location and marked-up site map
  • Photos tagged to each hole
  • Works offline with no reception
  • Branded PDF report sent from site
  • Client sign-off on the phone
  • Client report formats matched
  • Every past report searchable

Time, waste & invoicing

Invoices nobody argues with.

Time on site, travel, standby and tip runs are logged as they happen, with timestamps and photos to back them up. Approved jobs go straight to Xero or MYOB with the right rates already applied.

  • Site time and travel timestamps
  • Standby and delay logging with reasons
  • Minimum charge and call-out rules
  • Tip runs with volume and facility
  • Disposal docket photos
  • Client sign-off on hours
  • Client-specific rate cards
  • Invoices pushed to Xero or MYOB
  • Waste volume reports by month

Safety & compliance

Proof on hand when the site manager asks.

Pre-starts, SWMS and take 5s get signed on the device and filed against the job. Operator tickets and site inductions are tracked so nobody gets turned away at the gate.

  • Vehicle and vacuum unit pre-starts
  • SWMS signed per job
  • Take 5s and hazard reports
  • Incident and near miss reporting
  • Operator tickets and licences
  • Site induction records
  • Expiry alerts before tickets lapse
  • Everything exported for audits

Fleet maintenance

Trucks serviced before they break down on site.

Service schedules run off engine and PTO hours so pumps, blowers and chassis get looked after on time. Defects from pre-starts go straight to the workshop list.

  • Engine and PTO hour tracking
  • Service schedules per unit
  • Defects raised from pre-starts
  • Workshop job list
  • Rego and inspection reminders
  • Parts and repair history
  • Units blocked on the board when down
04How it changes

Before and after

A pothole, wolloped.

Here's how a typical service exposure job could change. Every operator runs differently, so we map yours first.

Before

  1. Booking scrawled down from a phone call
  2. Operator rings the office for the plans
  3. Pre-start ticked on a clipboard in the cab
  4. Depths written on a wet form
  5. Photos emailed in a batch that night
  6. Standby time argued over at invoice time

After

  1. Booking lands with site, depth and services filled in
  2. Plans and permits waiting on the operator's phone
  3. Pre-start signed on the device and filed
  4. Depths and photos logged per hole
  5. Photo report sent to the client from site
  6. Hours, standby and tip runs already on the invoice
05Services

Everything under one roof

Software, websites and systems for hydro excavation contractors.

Whether you're starting fresh or upgrading what you've got, it's one team from the first sketch to the support call.

Custom software for hydro excavation contractors

Built around how your hydro excavation company actually runs: online dig booking, truck & operator scheduling and the admin in between, in one system you own.

Websites for hydro excavation contractors

Fast, hand-built websites that rank for the searches your customers make and turn visits into enquiries, bookings or orders.

Hydro excavation company system upgrades

Running on spreadsheets, old software or a platform you've outgrown? We move your data across and upgrade in stages so the business never stops.

Apps and portals for hydro excavation contractors

Job packs on the phone and digital dig sheets: customer and staff portals that work on any phone without an app store.

Integrations and automation

We connect Xero, MYOB and BYDA so information moves on its own and nobody retypes it.

Hosting, support and care

Managed hosting, updates, backups and security for your hydro excavation company, looked after by the people who built it.

06Integrations

Connections

Plays nicely with what you already use.

We connect to the tools you rely on, work alongside platforms you're happy with or replace the ones holding you back.

  • Xero
  • MYOB
  • BYDA
  • Procore
  • SafetyCulture
  • ServiceM8
  • simPRO
  • AroFlo
  • Teletrac Navman
  • Geotab
  • Microsoft 365
  • Google Workspace
  • Dropbox
  • Deputy
  • Stripe
  • Twilio SMS
  • Google Maps
07How we work

The process

Some people dip their toe in. We turn up in a rebreather.

We get properly below the surface of your hydro excavation company: the systems, the busy days and the jobs everyone hates. Then we fix the bits that matter most first.

  1. 01

    Think

    We spend time in the office, the yard and out on a dig to see where bookings, paperwork and invoices actually get stuck.

  2. 02

    Archi-tech

    We plan it before writing code: your trucks, crews, clients, report formats, rates, waste, hosting and cost.

  3. 03

    Build

    Real engineering, shown to you early and often. Usually dig sheets and photo reports first, so the crews feel the win straight away.

  4. 04

    Look after

    We host it, maintain it and keep improving it. When something breaks you call the people who built it.

08Questions

FAQ

Things hydro excavation contractors ask us.

Something else on your mind? Ring 0423 011 252 and ask the people who'd build it.

Can it work with BYDA and our accounting software?

Usually, yes. We can attach BYDA plans to each job and connect to Xero or MYOB for invoicing. Then we build the booking and reporting parts around how your crews work.

Will it work on sites with no phone reception?

Yes. Dig sheets, photos and pre-starts can be captured offline and sync once the operator's back in range.

Can reports match what our clients ask for?

Yes. We can build your own branded report plus the specific formats your regular builders, councils or utilities want, all from the same dig sheets.

Can it track waste and tip runs?

Yes. Each load can be logged with volume, disposal facility and a photo of the docket, so it lands on the invoice and in your waste records.

We already use ServiceM8 or SafetyCulture. Do we have to switch?

No. If a platform is doing its job we build around it and connect to it. If it's holding you back, we'll show you what replacing it would involve before anything changes.

How much does a hydro excavation system cost?

It depends on what you need, so we quote up front once we understand it. No surprise invoices, no lock-in and you own what we build.

How long does it take?

Smaller jobs like a booking form or digital dig sheets can be quick. Bigger systems are planned in stages so you get the first win early instead of waiting for everything at once.

Who looks after it once it's built?

We do. We host it on our own managed servers and keep it updated and secure. When you need something you ring the people who built it.

We already have systems. Can you upgrade them instead of starting again?

Usually, yes. We keep what's working and upgrade the rest in stages. We move your data across, connect the old and new while we switch and retire the old system only when the new one is proven.

Contact

Got a hydro excavation company problem? Consider it wolloped.

Tell us what's slow, broken, manual or missing. You don't need a spec, just describe what's going on.

I've got