wollopit Got a problem? →

Concrete cutting software: job booking, dockets & invoicing

Concrete cutters: every core hole photographed and billed. Cut more, chase less.

Jobs booked over the phone, hole sizes scribbled on a docket and invoices disputed because nobody took a photo. We build booking, docket and scheduling systems for concrete cutters that record every core and cut with photos and bill it the same day. Then we host them and look after them.

Looking for job booking software for concrete cutting and drilling?

A day might be six small jobs: core holes for a plumber on level three, a saw cut through a slab for a new drain, a wall chase for a sparky and an after-hours door opening in a tilt panel. Each one needs sizes, depths, location, scan results and proof of what was done. Most cutters hold it together with phone calls, a diary, carbon-copy dockets and whatever photos ended up on an operator's camera roll.

Wollopit builds custom concrete cutting software around how your crew actually works. Builders and trades book with the details you need. Operators get their run on their phone with the scan report and access notes attached. Every hole and lineal metre is logged with photos on site and the docket turns into an invoice in Xero or MYOB the same afternoon. We connect the tools you already like and look after the whole lot on our own servers.

01The problems

What we hear from concrete cutters

Does your concrete cutting company have these problems? Here's how we'd fix them.

Most concrete cutters we talk to are flat out and good at the work. The money leaks out in the gaps between the phone call, the docket and the invoice.

  • The problemPhone bookings with half the detailsJobs come in by call and text with no diameters, no depths and no idea whether there's power or water on site.
    How we fix itOnline booking that asks for hole sizes, depths, quantities, access, power, water and scanning before the job lands in the diary.
  • The problemScanning not confirmedThe operator turns up and nobody knows if the slab's been scanned or where the post-tension cables run.
    How we fix itScan status, scan reports and permits checked and attached before the job can be dispatched.
  • The problemHandwritten docketsHole counts and metres cut are hard to read, easy to dispute and sometimes lost in the van.
    How we fix itDigital dockets with quantities, diameters, depths and lineal metres recorded per job, signed on the phone.
  • The problemNo proof of workBuilders dispute where the holes went, how many were drilled or whether the cut was the depth they asked for.
    How we fix itBefore and after photos tagged to every core and cut, with the location marked and a time stamp.
  • The problemOperators juggled by phoneTomorrow's runs are sorted with calls at 8pm and someone always ends up on the wrong side of town.
    How we fix itA schedule each operator sees on their phone, with addresses, contacts, scan reports and the gear they'll need.
  • The problemWrong gear on the truckThe job needs a 250mm bit and a wall saw but the truck left with a 200 and a ring saw.
    How we fix itGear lists built from the booking so the right bits, blades, saws and vacs are loaded before the operator leaves.
  • The problemPricing that changes by operatorMinimum charges, depth rates and after-hours loadings get applied differently depending on who wrote the docket.
    How we fix itYour rate card built in, so diameters, depths, metres, minimums and loadings price themselves the same way every time.
  • The problemSilica and safety paperworkSWMS, site inductions and dust controls live in a folder in the ute and nobody can find them when the site manager asks.
    How we fix itSWMS, prestart checks and silica controls recorded per job on the phone and attached to the docket.
  • The problemSlow invoicingDockets sit in the van until Friday and then someone spends Saturday morning typing them into Xero.
    How we fix itInvoices raised from completed dockets the same day, priced from your rate card and pushed to Xero or MYOB.
  • The problemBlades and bits wear out unseenDiamond blades and core bits cost a fortune and nobody knows which jobs chewed through them.
    How we fix itBlade and bit usage logged against jobs so you can see wear, cost per metre and when to reorder.
  • The problemSaws overdue for serviceWall saws, hydraulic packs and drill rigs miss services and test and tag dates slip past.
    How we fix itAn equipment register with service reminders, test and tag dates and fault reports from operators.
02What we build

Solutions

What we build for concrete cutters. Usually all talking to each other.

Pick the one that's hurting most or join the whole lot up. Everything is built around how your team works, not the other way round.

01

Online job booking

Builders and trades book cores, cuts and chases with sizes, depths, access and scan details.

02

Operator scheduling & dispatch

Daily runs on a drag-and-drop board, sent to each operator's phone with a map.

03

Photo dockets

Quantities, diameters, depths, metres and photos captured on site and signed off.

04

Scan & permit checks

Scan reports, permits and approvals attached before anyone drills.

05

Rate card pricing

Your rates for diameters, depths, metres, minimums and after-hours work built in.

06

Quotes

Quick quotes from your rate card that turn into bookings when accepted.

07

Customer portal

Builders see dockets, photos and invoices for every site in one login.

08

Same-day invoicing

Completed dockets turned straight into invoices in Xero or MYOB.

09

SWMS & silica records

SWMS, prestarts, inductions and dust controls recorded on the job.

10

Gear lists

The right bits, blades, saws and vacs listed for every job before the truck leaves.

11

Blade & bit tracking

Usage and wear per job, cost per metre and reorder alerts.

12

Equipment register

Service schedules, test and tag dates and fault reports for every saw and rig.

13

A website that books work

Fast on phones, built to rank for 'concrete cutting near me' with booking built in.

03The systems

The big ones

Your whole cutting business, on one system.

These are the systems concrete cutters ask us about most. Each one works on its own and they get properly clever when they're joined up.

Job booking

Bookings that arrive with every detail.

Builders, plumbers and sparkies book through a simple form that asks the questions you'd otherwise chase. Diameters, depths, quantities, access, power and water are all there before the job hits the diary. Repeat customers book again in a few taps.

  • Cores, saw cuts, chases and openings
  • Diameters, depths and quantities
  • Access, power and water questions
  • Scan report upload
  • Site contact and induction details
  • After-hours and urgent jobs flagged
  • Repeat bookings for regular builders
  • SMS confirmation to the customer

Scheduling & dispatch

Every operator knows tomorrow's run tonight.

Drag jobs onto operators and trucks on one board and the run lands on their phone with addresses, contacts and scan reports. The gear list for each job comes with it so nobody turns up with the wrong bit.

  • Drag-and-drop daily board
  • Runs sent to operator phones
  • Map view to cut down travel
  • Gear list per job
  • Scan and permit status shown
  • Customer SMS when the operator's on the way
  • Job changes pushed instantly
  • Leave and availability from Deputy

Photo dockets

Photos settle it before anyone argues.

Operators fill in the docket on their phone as they go: each hole or cut with size, depth and a before and after photo. The site contact signs on the screen and the builder gets a copy before the operator has packed up.

  • Quantities, diameters and depths
  • Lineal metres for saw cuts
  • Before and after photos per item
  • Location marked on a drawing
  • Extra work added on the spot
  • Customer sign-off on the phone
  • Works with no signal and syncs later
  • Docket emailed to the builder instantly

Safety & compliance

Nobody drills until the checks are done.

Scan reports, permits, SWMS and prestart checks are tied to the job so the operator can't start without them. Silica dust controls like water suppression and extraction are recorded each time so you can show the site manager in seconds.

  • Scan status before dispatch
  • Permits and approvals attached
  • SWMS signed on the phone
  • Prestart checks for saws and rigs
  • Silica dust controls recorded
  • Site induction records
  • Incident and near miss reports
  • Records kept per customer and site

Invoicing & portal

Invoiced before lunch, not on Friday.

Completed dockets price themselves from your rate card and become invoices in Xero or MYOB the same day. Builders log in to a portal to see every docket, photo and invoice for each site so the disputes dry up.

  • Rate card pricing per item
  • Minimums and after-hours loadings
  • Invoices pushed to Xero or MYOB
  • Card payments by Stripe
  • Builder portal by site
  • Photos attached to invoices
  • Purchase order numbers captured
  • Overdue reminders sent automatically
04How it changes

Before and after

A core hole, wolloped.

Here's how a simple job for a plumber could change. Every cutting business is different, so we map yours first.

Before

  1. Job booked by text with no diameter
  2. Ring back twice to find out the depth and if it's scanned
  3. Operator turns up with the wrong bit
  4. Docket written in the van
  5. Builder disputes the hole count
  6. Invoice sent on Friday

After

  1. Job booked online with sizes and depths
  2. Scan report attached before dispatch
  3. Gear list on the operator's phone
  4. Docket completed on a phone with photos
  5. Site contact signs on the spot
  6. Invoice sent before lunch
05Services

Everything under one roof

Software, websites and systems for concrete cutters.

Whether you're starting fresh or upgrading what you've got, it's one team from the first sketch to the support call.

Custom software for concrete cutters

Built around how your concrete cutting company actually runs: online job booking, operator scheduling & dispatch and the admin in between, in one system you own.

Websites for concrete cutters

Fast, hand-built websites that rank for the searches your customers make and turn visits into enquiries, bookings or orders.

Concrete cutting company system upgrades

Running on spreadsheets, old software or a platform you've outgrown? We move your data across and upgrade in stages so the business never stops.

Apps and portals for concrete cutters

Photo dockets and scan & permit checks: customer and staff portals that work on any phone without an app store.

Integrations and automation

We connect ServiceM8, simPRO and AroFlo so information moves on its own and nobody retypes it.

Hosting, support and care

Managed hosting, updates, backups and security for your concrete cutting company, looked after by the people who built it.

06Integrations

Connections

Plays nicely with what you already use.

We connect to the job management and accounting tools you rely on, work alongside the ones you're happy with or replace the ones holding you back.

  • ServiceM8
  • simPRO
  • AroFlo
  • Tradify
  • Fergus
  • Xero
  • MYOB
  • QuickBooks
  • Procore
  • SafetyCulture
  • Hilti ON!Track
  • Teletrac Navman
  • Deputy
  • Microsoft 365
  • Google Workspace
  • Dropbox
  • Stripe
  • Twilio SMS
  • Google Maps
07How we work

The process

Some people dip their toe in. We turn up in a rebreather.

We get properly below the surface of your concrete cutting company: the systems, the busy days and the jobs everyone hates. Then we fix the bits that matter most first.

  1. 01

    Think

    We ride along on a run, sit in on the bookings and look at your dockets to see where the time and money go.

  2. 02

    Archi-tech

    We plan it before writing code: your bookings, rate card, dockets, safety checks, gear, invoicing, hosting and cost.

  3. 03

    Build

    Real engineering, shown to you early and often. Usually the booking and docket side first so you get paid faster from the start.

  4. 04

    Look after

    We host it, maintain it and keep improving it. When something breaks you call the people who built it.

08Questions

FAQ

Things concrete cutters ask us.

Something else on your mind? Ring 0423 011 252 and ask the people who'd build it.

Can it work with ServiceM8 or our accounting software?

Usually, yes. We can connect to ServiceM8, simPRO, Xero or MYOB so jobs and invoices aren't entered twice. Then we build the booking and docket parts that suit cutting and drilling work.

Can it price jobs by diameter, depth and metres?

Yes. We build your rate card in, including minimum charges, depth rates, after-hours loadings and travel. Dockets price themselves the same way no matter which operator fills them in.

Will it work on site with no signal?

Yes. Operators can fill in dockets and take photos in a basement or plant room with no reception. Everything syncs once they're back in range.

Can builders see the photos and dockets?

Yes. Each builder gets a portal with every docket, photo and invoice for each of their sites. You can also email the signed docket straight after the job.

Can it help with silica and SWMS records?

Yes. SWMS, prestart checks and dust controls like water suppression and extraction can be recorded on the job and kept with the docket. We build the forms around your safety system.

Do we have to switch from the platforms we already use?

No. If your job management or accounting software is doing its job, we build around it. If something is holding you back, we'll show you what replacing it would involve before anything changes.

How much does a concrete cutting system cost?

It depends on what you need, so we quote up front once we understand it. No surprise invoices, no lock-in and you own what we build.

How long does it take?

Smaller pieces like online booking or photo dockets can be quick. Bigger systems are planned in stages so you get the first win early instead of waiting for everything at once.

Who looks after it once it's built?

We do. We host it on our own managed servers and keep it updated and secure. When you need something you ring the people who built it.

We already have systems. Can you upgrade them instead of starting again?

Usually, yes. We keep what's working and upgrade the rest in stages. We move your data across, connect the old and new while we switch and retire the old system only when the new one is proven.

Contact

Got a concrete cutting company problem? Consider it wolloped.

Tell us what's slow, broken, manual or missing. You don't need a spec, just describe what's going on.

I've got