wollopit Got a problem? →

HDD software: bore logs, permits & as-builts

Directional drillers: bore logs that don't live in the cab. Drill more, retype less.

Rod readings go on a paper sheet, permits sit in someone's inbox and as-builts get drawn weeks after the shot. We build bore logging, permit and handover systems for directional drillers that turn every bore into a clean record the client can sign off. Then we host them and look after them.

Looking for HDD bore log and as-built software that works on the rig?

Every bore needs permits, plans and locates before it starts and a solid record once it's done. Most drillers keep the logs on paper, the permits in email, the BYDA plans in a folder on someone's laptop and the as-builts in a drafting queue that's always three jobs behind. The asset owner won't pay until the pack lands, so the money waits on the paperwork.

Wollopit builds custom software for directional drilling companies around how your rigs and crews actually run. The locator logs each rod on a tablet, guidance data comes straight in where your system exports it and the as-built profile draws itself from the log. Permits remind you before they expire. Dockets and variations get signed on site. We connect the tools you already use, then host and look after the lot.

01The problems

What we hear from directional drillers

Does your directional drilling company have these problems? Here's how we'd fix them.

Most drilling outfits we talk to are brilliant at steering a bore under a highway and run the office on paper sheets, group chats and one very tired admin. It works until a client asks for a pack from six months ago.

  • The problemPaper bore logsRod-by-rod depth, pitch and offset readings are scribbled on a sheet in the cab, then lost, rained on or misread back at the office.
    How we fix itBore logs entered per rod on a tablet, with readings checked against the design as you go and synced the moment there's signal.
  • The problemPermits chased by emailRoad opening permits, traffic management plans and rail or council approvals expire or go missing right before the crew turns up.
    How we fix itA permit register for every job with conditions, expiry dates, attached documents and reminders before anything runs out.
  • The problemAs-builts take weeksLogs are retyped and drawn up long after the job, by which time nobody remembers why the bore dipped at rod 14.
    How we fix itAs-built profiles and plan views generated from the bore log data, ready to check and send the same day.
  • The problemStrikes hard to defendWhen a service gets hit, the records showing what you located and potholed are thin or sitting in someone's camera roll.
    How we fix itBYDA plans, locate marks, pothole depths and geotagged photos stored against every bore before the pilot goes in.
  • The problemRig and crew clashesTwo jobs need the big rig on the same day, the vac truck is booked elsewhere and the locator is on leave.
    How we fix itOne schedule board for rigs, support gear, crews and sites, with clashes flagged before anyone gets a text at 5am.
  • The problemClients waiting on handoverAsset owners want logs, as-builts, photos and test results before they'll pay and pulling it together takes days.
    How we fix itHandover packs built from the job record in their required format and sent in one go on completion.
  • The problemVariations nobody claimsYou hit rock, ream an extra pass or sit on standby waiting for traffic control and it never makes the invoice.
    How we fix itVariations logged on site with photos, times and client sign-off, then pulled straight into the invoice.
  • The problemDaily dockets on carbon paperDockets come back crumpled on Friday, half unsigned, then get keyed into Xero one by one.
    How we fix itDigital daily dockets signed on the tablet, with hours, metres and gear going straight to invoicing and payroll.
  • The problemPre-starts and SWMS in a uteRig pre-starts, SWMS and toolbox talks are on paper in a glovebox. An auditor wants to see last March.
    How we fix itPre-starts, SWMS sign-ons and toolbox talks on phones, filed against the rig, crew and job automatically.
  • The problemMud and spoil untrackedBentonite, polymer, water and slurry disposal loads aren't recorded, so costs leak and disposal dockets go missing.
    How we fix itFluid use and spoil loads logged per bore, with disposal dockets photographed and job costs updated.
  • The problemTooling wears out unnoticedRods, drill heads, reamers and sondes are run until something fails mid-bore.
    How we fix itRig hours, service intervals and tooling metres tracked, with alerts before a service or a worn reamer bites you.
02What we build

Solutions

What we build for directional drillers. Usually all talking to each other.

Pick the one that's hurting most or join the whole lot up. Everything is built around how your team works, not the other way round.

01

Digital bore logs

Rod-by-rod depth, pitch, roll and offset captured on a tablet, working offline and checked against the design.

02

Guidance data import

Pull logs from your locating system's exports where available, so readings aren't typed twice.

03

Permit register

Road opening, traffic, rail and council permits per job with conditions, expiry dates and reminders.

04

BYDA & pre-bore records

Plans, locates, pothole depths and photos filed against each bore before you drill.

05

As-built profiles

Profile and plan drawings generated from the bore log, with exports for your drafter or CAD.

06

Rig & crew scheduling

Rigs, vac trucks, crews and sites on one board, with clash warnings and crew SMS.

07

Daily dockets & variations

Hours, metres, standby and extras signed on site and sent straight to invoicing.

08

Pre-starts & SWMS

Rig pre-starts, SWMS sign-ons and toolbox talks on phones, filed by job and machine.

09

Fluid & spoil tracking

Mud mixes, water use and disposal loads per bore, with dockets attached.

10

Rig & tooling maintenance

Engine hours, service intervals and tooling metres with alerts before things wear out.

11

Quoting by the metre

Quotes built from bore length, ground conditions, diameter and setup, with your own rates.

12

Handover packs

Logs, as-builts, photos, permits and test results bundled in the asset owner's format.

13

Client portal

Head contractors and asset owners see progress, sign off dockets and download packs.

14

A website that wins work

Quick on mobile, showing your rigs and capabilities, built to rank for HDD in your region.

03The systems

The big ones

Every bore, on one system.

These are the systems directional drillers ask us about most. Each one works on its own and they get properly useful once they're joined up.

Bore logging

Log the rod. Not the paper.

The locator logs each rod on a rugged tablet as the bore goes in. Readings are checked against the design depth and cover, so a drift gets spotted at rod 6 instead of at the exit pit. Everything syncs back to the office when there's signal.

  • Rod-by-rod depth, pitch and offset
  • Works offline on site
  • Design profile and cover checks
  • Out-of-tolerance warnings
  • Guidance system data import
  • Entry and exit pit details
  • Product, diameter and reamer passes
  • Geotagged photos per rod or pit
  • Ground conditions and notes
  • Locked once signed off

Permits & pre-bore

Permits and locates sorted before the rig rolls.

Every job carries its permits, traffic management plans, BYDA plans and locate records in one place. Reminders go out before anything expires and the crew can see the conditions on their phones. When a service owner asks what you did before drilling, the answer is two taps away.

  • Permit register per job
  • Expiry and renewal reminders
  • Permit conditions on crew phones
  • Traffic management plans attached
  • BYDA plans stored per bore
  • Locate marks and pothole depths
  • Geotagged pre-bore photos
  • Service crossings flagged on the profile
  • Ready-to-drill checklist
  • Full record if a strike happens

As-builts & handover

As-builts the day you pull back.

The bore log becomes the as-built. Profiles and plan views draw themselves from the readings, ready for a quick check or a hand-off to your drafter. Then the handover pack bundles the lot in the format the asset owner wants, so the invoice isn't stuck waiting on paperwork.

  • Profile drawn from the bore log
  • Plan view on a map
  • Depth of cover at every rod
  • Exports for CAD and your drafter
  • Handover pack templates per client
  • Photos, permits and test results included
  • Client sign-off online
  • Packs sent from the job in one go
  • Every past pack searchable
  • Revision history kept

Scheduling & dockets

The right rig, the right crew, the right site.

Plan every rig, vac truck, support ute and crew on one board. Clashes get flagged before they happen and crews get their start time and site pin by SMS. On site they sign off the daily docket and any variations, then it all flows into invoicing.

  • Drag-and-drop schedule by rig and crew
  • Vac trucks and support gear booked
  • Clash and leave warnings
  • Crew SMS with site pin and start time
  • Digital daily dockets
  • Variations with photos and sign-off
  • Standby and rock time captured
  • Metres drilled per day
  • Invoices to Xero or MYOB
  • Timesheets for payroll

Rigs & job costs

Know what every bore actually cost you.

Rig hours, tooling wear, mud and disposal loads all land against the job. You see the real margin on each bore and the next quote gets sharper. Service alerts keep rigs out of the workshop at the worst possible moment.

  • Rig engine and drilling hours
  • Service intervals and alerts
  • Rod, head and reamer metres
  • Pre-starts on crew phones
  • Mud and water use per bore
  • Spoil loads and disposal dockets
  • Job costs against the quote
  • Margin by job type and ground
  • Quotes built from your real rates
  • Defect reporting from site
04How it changes

Before and after

A road crossing, wolloped.

Here's how a single road crossing could change. Every drilling company runs a bit differently, so we map yours first.

Before

  1. Permit found in an old email the night before
  2. Locate photos sit in a crew member's camera roll
  3. Readings written on a paper sheet in the cab
  4. Rock and standby forgotten by Friday
  5. As-built drawn up three weeks later
  6. Client chases the handover pack before paying

After

  1. Permit tracked with a reminder a week out
  2. Locates and potholes filed against the bore
  3. Readings logged per rod with cover checks
  4. Variation signed on site with photos
  5. As-built profile built from the log
  6. Handover pack sent on completion
05Services

Everything under one roof

Software, websites and systems for directional drillers.

Whether you're starting fresh or upgrading what you've got, it's one team from the first sketch to the support call.

Custom software for directional drillers

Built around how your directional drilling company actually runs: digital bore logs, guidance data import and the admin in between, in one system you own.

Websites for directional drillers

Fast, hand-built websites that rank for the searches your customers make and turn visits into enquiries, bookings or orders.

Directional drilling company system upgrades

Running on spreadsheets, old software or a platform you've outgrown? We move your data across and upgrade in stages so the business never stops.

Apps and portals for directional drillers

Permit register and bYDA & pre-bore records: customer and staff portals that work on any phone without an app store.

Integrations and automation

We connect DigiTrak, Subsite Electronics and BYDA so information moves on its own and nobody retypes it.

Hosting, support and care

Managed hosting, updates, backups and security for your directional drilling company, looked after by the people who built it.

06Integrations

Connections

Plays nicely with what you already use.

We connect to the tools you rely on, work around the platforms your head contractors use and replace the ones holding you back.

  • DigiTrak
  • Subsite Electronics
  • BYDA
  • AutoCAD
  • Procore
  • Assignar
  • HammerTech
  • SafetyCulture
  • Xero
  • MYOB
  • Microsoft 365
  • Google Workspace
  • Dropbox
  • Deputy
  • Stripe
  • Twilio SMS
  • Google Maps
  • Nearmap
07How we work

The process

Some people dip their toe in. We turn up in a rebreather.

We get properly below the surface of your directional drilling company: the systems, the busy days and the jobs everyone hates. Then we fix the bits that matter most first.

  1. 01

    Think

    We spend time at the rig, in the ute and in the office, then work out where the paperwork is slowing jobs and payments down.

  2. 02

    Archi-tech

    We plan it before writing code: your bore logs, guidance data, permits, as-builts, client formats, scheduling, hosting and cost.

  3. 03

    Build

    Real engineering, shown to you early and often. Usually bore logging or handover first, so you get a win on your next job.

  4. 04

    Look after

    We host it, maintain it and keep improving it. When something breaks you call the people who built it.

08Questions

FAQ

Things directional drillers ask us.

Something else on your mind? Ring 0423 011 252 and ask the people who'd build it.

Can it work with our guidance system and accounting software?

Often, yes. Where the export allows, we can take bore data from guidance systems like DigiTrak and connect to Xero or MYOB for invoicing. Then we build the logging, permits and handover parts around them.

Will it work on site with no signal?

Yes. Bore logs, dockets and pre-starts can be filled in offline on a tablet or phone and they sync once the device is back in range.

Can it produce as-builts in the format our clients want?

Yes. We set up profile drawings and handover pack templates to match what each asset owner or head contractor asks for. Where they need CAD, we export files your drafter can finish quickly.

Does it help if we strike a service?

It gives you a solid record. BYDA plans, locates, pothole depths, photos and rod-by-rod readings are all stored against the bore with times and names, so you can show exactly what was done.

Do we have to switch from the systems we use now?

No. If your guidance system, accounting software or a head contractor's platform is doing its job, we build around it. If something's holding you back, we'll show you what replacing it involves before anything changes.

How much does a system like this cost?

It depends on what you need, so we quote up front once we understand it. No surprise invoices, no lock-in and you own what we build.

How long does it take?

Smaller pieces like digital bore logs or a permit register can be quick. Bigger systems are built in stages so you get the first win early instead of waiting for the whole thing.

Who looks after it once it's built?

We do. We host it on our own managed servers and keep it updated, backed up and secure. When you need a change you ring the people who built it.

We already have systems. Can you upgrade them instead of starting again?

Usually, yes. We keep what's working and upgrade the rest in stages. We move your data across, connect the old and new while we switch and retire the old system only when the new one is proven.

Contact

Got a directional drilling company problem? Consider it wolloped.

Tell us what's slow, broken, manual or missing. You don't need a spec, just describe what's going on.

I've got