Stressing app
Pressures and elongations captured tendon by tendon at the jack, working offline in basements and dead zones.
Post-tensioners: stressing records the engineer can actually read. Every tendon stressed, checked and certified.
Elongations scribbled on a clipboard, calcs checked back at the office and the builder ringing because the props can't come out until the certificate lands. We build stressing record systems for post-tensioning contractors that capture every tendon at the jack, check it against the design and issue the certificate on the spot. Then we host it and look after it.
Every PT slab comes with a tendon schedule, calculated elongations, gauge pressures and tolerances to hit. Then there's transfer strength to confirm before you stress, jacks that need current calibrations and grouting to record before handover. Most post-tensioning companies run all of that on paper logs, marked-up drawings, a spreadsheet of formulas only one person trusts and a phone full of photos. Meanwhile the builder can't strip props or start the next pour until the engineer has the records.
Wollopit builds custom post-tensioning software around how your crews actually work. Tendon schedules load straight from your design data. Crews enter pressures and elongations at the jack on a tablet, variances flag before the jack comes off and the stressing certificate goes out the moment the last tendon is done. Equipment, grouting, level schedules and claims all hang off the same job. We connect the tools you already use, replace the ones holding you back and look after the lot on our own servers.
What we hear from post-tensioning contractors
Most PT contractors we talk to are spot on with the steel and the jack. It's the paperwork afterwards that holds up the pour cycle.
Solutions
Pick the one that's hurting most or join the whole lot up. Everything is built around how your team works, not the other way round.
Pressures and elongations captured tendon by tendon at the jack, working offline in basements and dead zones.
Design elongations loaded with tolerance bands so out-of-range tendons flag before the jack comes off.
Branded certificates issued straight from site data with calibration certs and photos attached.
Tendon IDs, lengths, profiles and calculated elongations pulled in from your design spreadsheets.
Cylinder results logged per pour with a clear ready-to-stress status for the crew.
Jacks, pumps and gauges with serial numbers, calibration dates and expiry alerts.
Grout batches, pressures, vents and sign-offs logged per duct for bonded systems.
Each level's tendon plan showing installed, stressed and grouted in colour.
Install, pour, stressing and grouting planned per floor on one shared board.
Strand, anchors, ducts and chairs planned from the schedule and tracked per job.
A login where the engineer and builder see records, certificates and progress for their job.
SWMS sign-ons, prestarts, exclusion zone checks and ticket expiries on phones.
Progress claims per level, re-stress callouts and standing time logged with photos and sent to Xero or MYOB.
The big ones
These are the systems post-tensioning contractors ask us about most. Each works on its own and they get properly useful once they're joined up.
Stressing records
Crews pick the level, pick the tendon and enter gauge pressure and elongation as they stress. The app checks each reading against the calculated elongation straight away, so a variance gets sorted while the jack is still on.
Certificates & portal
When the last tendon on a pour is stressed, a branded stressing certificate is built from the site data with calibration certs attached. The engineer and builder get it straight away and can log in to see every record behind it.
Equipment & calibration
Every jack, pump and gauge gets its own record with serial number, calibration certificate and due date. The right calibration attaches itself to each stressing record and you get a heads up well before anything expires.
Pour cycle scheduling
Install, inspection, pour, transfer strength, stressing and grouting laid out level by level. When the builder moves a pour, the crews and the office see it straight away and the ready-to-stress flag tells everyone when it's go time.
Grouting & claims
Grouting is logged per duct with batch, pressure and sign-off so the handover pack is complete. Completed work rolls into progress claims per level and re-stress callouts or standing time are captured on site before they're forgotten.
Before and after
Here's how a stressing day could change. Every PT outfit runs a bit differently, so we map yours first.
Everything under one roof
Whether you're starting fresh or upgrading what you've got, it's one team from the first sketch to the support call.
Built around how your post-tensioning company actually runs: stressing app, variance checks and the admin in between, in one system you own.
Fast, hand-built websites that rank for the searches your customers make and turn visits into enquiries, bookings or orders.
Running on spreadsheets, old software or a platform you've outgrown? We move your data across and upgrade in stages so the business never stops.
Stressing certificates and tendon schedule import: customer and staff portals that work on any phone without an app store.
We connect Xero, MYOB and Procore so information moves on its own and nobody retypes it.
Managed hosting, updates, backups and security for your post-tensioning company, looked after by the people who built it.
Connections
We connect to the tools you rely on, work alongside the builder's platforms and replace the spreadsheets holding you back.
The process
We get properly below the surface of your post-tensioning company: the systems, the busy days and the jobs everyone hates. Then we fix the bits that matter most first.
We go out on a stressing day, sit with whoever types up the certificates and work out what's actually holding up your pour cycle.
We plan it before writing code: your tendon data, tolerances, certificate format, equipment, builders, hosting and cost.
Real engineering, shown to you early and often. Usually the stressing app and certificates first, so you get a win on your next slab.
We host it, maintain it and keep improving it. When something breaks you call the people who built it.
FAQ
Something else on your mind? Ring 0423 011 252 and ask the people who'd build it.
Usually, yes. We can import tendon schedules and calculated elongations from your design spreadsheets so nothing's retyped. We also connect to Xero or MYOB for invoicing.
Yes. The stressing app works offline and syncs as soon as the tablet gets signal again, so a car park level or a dead zone doesn't stop the crew.
Yes. We build the certificate around the format your engineers expect, in your branding, with calibration certs and variance notes included.
Yes. We set it up for the way you work, whether that's unbonded slabs, bonded tendons with grouting, band beams or transfer slabs.
Yes, if you want them to. They can see progress, records and certificates for their own jobs and nothing else.
No. If Procore, Aconex or your accounting software is doing its job, we build around it. If something is holding you back, we'll show you what replacing it would involve before anything changes.
It depends on what you need, so we quote up front once we understand it. No surprise invoices, no lock-in and you own what we build.
We plan it in stages. Something like the stressing app and certificates can come first, so you get the first win early instead of waiting for the whole system.
We do. We host it on our own managed servers and keep it updated, backed up and secure. When you need something you ring the people who built it.
Usually, yes. We keep what's working and upgrade the rest in stages. We move your data across, connect the old and new while we switch and retire the old system only when the new one is proven.
Contact
Tell us what's slow, broken, manual or missing. You don't need a spec, just describe what's going on.