wollopit Got a problem? →

Tilt-up panel register & crane lift scheduling software

Tilt-up contractors: every panel tracked from bed to brace. Lift more, chase less.

Your panel register lives in a spreadsheet. The pour sequence is on a whiteboard and the crane gets booked by phone on a hunch. We build panel and lift scheduling for tilt-up contractors that tracks every panel from shop drawing to standing. Then we host it and look after it.

Looking for tilt-up panel register and lift scheduling software?

A tilt-up job can have hundreds of panels. Each one has its own shop drawing, inserts, casting bed slot, cure date and lift. One panel cast out of order or one cylinder result that hasn't come back can hold up the crane and the whole erection day. Meanwhile the register is a spreadsheet that three people edit and nobody trusts.

Wollopit builds custom tilt-up software around how your crew actually works. Drawings from your detailers turn into a live panel register. Casting sequences get planned per bed, pre-pour checks get signed on a phone and lift days are built from cure dates and erection order. We connect the tools you already use and replace the ones slowing you down. Then we host the lot on our own servers.

01The problems

What we hear from tilt-up contractors

Does your tilt-up contractor have these problems? Here's how we'd fix them.

Most tilt-up crews are brilliant on the slab and run the paperwork on spreadsheets, whiteboards and phone calls. It holds together right up until the crane's on site and panel P-47 isn't ready.

  • The problemPanel register in a spreadsheetRevisions, weights and status get updated by whoever remembers. Two versions float around the office.
    How we fix itA live panel register with drawing revision, weight, dimensions and status for every panel.
  • The problemRevisions slip throughThe detailer issues Rev C and the crew casts off Rev B because nobody swapped the printout in the site shed.
    How we fix itSuperseded drawings get flagged on site the moment a new revision lands. Crews only ever see the current one.
  • The problemPour sequence on a whiteboardStack casting order is planned on the slab, photographed and texted around.
    How we fix itCasting sequences planned per bed and stack with pour dates the whole team can see.
  • The problemCrane days wastedThe crane and riggers turn up and panels aren't cured, aren't released or are stuck at the bottom of a stack.
    How we fix itLift schedules built from cure dates, strength results and erection sequence so only ready panels get booked.
  • The problemInserts missedLifting inserts, ferrules, cast-in plates and conduits get checked from memory before the pour.
    How we fix itPre-pour checklists per panel with photos, signed off by the leading hand before the truck arrives.
  • The problemEngineer sign-offs chasedShop drawing approvals and concrete strength results sit in somebody's inbox.
    How we fix itApprovals and cylinder results attached to each panel, with an alert when it's cleared to lift.
  • The problemCasting beds run out of roomSlab space is tight and panels get stacked in an order that turns the lift day into a puzzle.
    How we fix itA casting layout planner that works backwards from erection order so the top of each stack lifts first.
  • The problemBracing not trackedNobody's sure which braces can come out or which panels are still waiting on roof steel.
    How we fix itBrace installation, inspection and removal logged against every panel with sign-off.
  • The problemBookings by separate phone callsRiggers, crane hire, the concrete pump and the plant all get booked one call at a time.
    How we fix itOne job calendar for crew, crane, pump and concrete with SMS confirmations to everyone.
  • The problemSafety paperwork in the utePrestarts, lift plans and SWMS sign-ons end up on paper nobody can find later.
    How we fix itDigital prestarts, lift plans and SWMS sign-ons on phones, stored against the job and the day.
  • The problemProgress claims by guessworkClaiming the month means counting panels off the whiteboard and photos on someone's phone.
    How we fix itProgress claims built from panels cast and stood, ready for the builder and sent through to Xero or MYOB.
02What we build

Solutions

What we build for tilt-up contractors. Usually all talking to each other.

Pick the one that's hurting most or join the whole lot up. Everything is built around how your team works, not the other way round.

01

Panel register

Every panel's mark, drawing, revision, weight and status in one live list.

02

Drawing revision control

New revisions imported from your detailers with superseded ones flagged on site.

03

Casting layout & sequences

Beds, stacks and pour dates planned so erection order works.

04

Pre-pour checklists

Inserts, ferrules, cast-ins and reo checked per panel with photos.

05

Concrete & pour bookings

Pour dates, volumes and mix sent to your supplier and pump in one go.

06

Approvals & test results

Engineer sign-offs and cylinder results attached to each panel.

07

Lift scheduling

Crane days built from cure dates, results and erection sequence.

08

Erection tracking

Panels marked as stood on site with the time, crew and photos.

09

Bracing register

Braces installed, inspected and removed with sign-off per panel.

10

Site diaries & safety

Prestarts, lift plans, SWMS and daily diaries on phones.

11

Progress claims

Claims built from panels cast and stood, pushed to Xero or MYOB.

12

Builder portal

Builders see panel status, lift dates and sign-offs without ringing you.

03The systems

The big ones

Your whole tilt-up job, on one system.

These are the systems tilt-up contractors need most. Each one works on its own and they get properly clever once they're joined up.

Panel register

Every panel, one source of truth.

Panel data comes in from your shop drawings and becomes a live register. Revisions, weights, inserts and status stay current on every phone in the office and on the slab.

  • Panel marks, sizes and weights
  • Import from shop drawings
  • Revision history per panel
  • Superseded drawings flagged
  • Status from drawn to stood
  • Insert and cast-in schedules
  • Filter by gridline or elevation
  • Works on phones on site

Casting & pours

Stacks cast in the order they'll lift.

Plan which panels go on which bed and in what stack order, working backwards from erection sequence. Pre-pour checklists and concrete bookings hang off each pour.

  • Casting bed and stack planner
  • Order driven by erection sequence
  • Pour dates and volumes
  • Concrete and pump bookings
  • Pre-pour checklists with photos
  • Leading hand sign-off
  • Bond breaker and curing logs
  • Weather delays rescheduled

Lift scheduling

Book the crane for panels that are actually ready.

Lift days get built from cure dates, cylinder results and engineer releases. If a panel isn't cleared it doesn't make the list, so the crane never waits.

  • Lift lists from cure dates
  • Strength results gate each lift
  • Engineer release per panel
  • Erection sequence by gridline
  • Crane and rigger bookings
  • Panel weights against crane capacity
  • SMS confirmations to the crew
  • Lift plans attached to the day

Erection & bracing

Know what's standing and what's holding it up.

Crews mark panels as stood with photos straight from the slab. Every brace is logged in, inspected and signed out so nothing comes down early.

  • Panels marked stood on site
  • Photos and times per lift
  • Brace install logged per panel
  • Brace inspections recorded
  • Removal released by sign-off
  • Panels waiting on roof steel
  • Daily site diary
  • Prestarts and SWMS sign-ons

Claims & reporting

Claim the month off real progress.

Progress claims come straight from panels cast and stood. Builders get a portal with live status so the phone stops ringing and invoices land in your accounts.

  • Claims from cast and stood panels
  • Variations logged per panel
  • Invoices to Xero or MYOB
  • Builder portal with live status
  • Lift dates shared with the builder
  • Job progress at a glance
  • Photos and sign-offs on file
04How it changes

Before and after

A lift day, wolloped.

Here's how a lift day could change. Every tilt-up crew runs a bit differently, so we map yours first.

Before

  1. Panel status lives in a spreadsheet
  2. Pour order sits on a whiteboard
  3. Crane books in before results are back
  4. Insert checks done from memory
  5. Crane waits on an uncured panel

After

  1. Every panel tracked live
  2. Casting sequence planned per bed
  3. Lifts booked off cure dates and results
  4. Checklists signed with photos
  5. Only cleared panels make the lift list
05Services

Everything under one roof

Software, websites and systems for tilt-up contractors.

Whether you're starting fresh or upgrading what you've got, it's one team from the first sketch to the support call.

Custom software for tilt-up contractors

Built around how your tilt-up contractor actually runs: panel register, drawing revision control and the admin in between, in one system you own.

Websites for tilt-up contractors

Fast, hand-built websites that rank for the searches your customers make and turn visits into enquiries, bookings or orders.

Tilt-up contractor system upgrades

Running on spreadsheets, old software or a platform you've outgrown? We move your data across and upgrade in stages so the business never stops.

Apps and portals for tilt-up contractors

Casting layout & sequences and pre-pour checklists: customer and staff portals that work on any phone without an app store.

Integrations and automation

We connect Tekla Structures, Procore and Aconex so information moves on its own and nobody retypes it.

Hosting, support and care

Managed hosting, updates, backups and security for your tilt-up contractor, looked after by the people who built it.

06Integrations

Connections

Plays nicely with what you already use.

We connect to the tools your office and detailers already use. We work alongside the platforms you're happy with and replace the ones holding you back.

  • Tekla Structures
  • Procore
  • Aconex
  • Autodesk Construction Cloud
  • Bluebeam
  • Xero
  • MYOB
  • Microsoft 365
  • Microsoft Project
  • Google Workspace
  • Dropbox
  • SafetyCulture
  • Deputy
  • Stripe
  • Twilio SMS
  • Google Maps
07How we work

The process

Some people dip their toe in. We turn up in a rebreather.

We get properly below the surface of your tilt-up contractor: the systems, the busy days and the jobs everyone hates. Then we fix the bits that matter most first.

  1. 01

    Think

    We spend time on the slab, in the site shed and in the office to work out where panels, pours and lifts are getting stuck.

  2. 02

    Archi-tech

    We plan it before writing code: your panel data, casting beds, checklists, lift rules, integrations, hosting and cost.

  3. 03

    Build

    Real engineering, shown to you early and often. Usually the panel register first so you get a win before the next lift day.

  4. 04

    Look after

    We host it, maintain it and keep improving it. When something breaks you call the people who built it.

08Questions

FAQ

Things tilt-up contractors ask us.

Something else on your mind? Ring 0423 011 252 and ask the people who'd build it.

Can it pull panel data from our shop drawings?

Usually, yes. We can import panel marks, weights and revisions from your detailers' exports, including from Tekla where they use it. New revisions get flagged so the crew never casts off an old drawing.

Can it stop us booking the crane for panels that aren't ready?

Yes. Lift lists are built from cure dates, cylinder results and engineer releases. A panel without a release doesn't make the list.

Will the crew actually use it on site?

It's built for phones with big buttons, photos and quick sign-offs. If it's slower than the whiteboard we haven't done our job.

Do we have to switch from Procore or our accounting software?

No. If Procore, Aconex, Xero or MYOB are doing the job we build around them. If something's holding you back we'll show you what replacing it involves before anything changes.

Can builders see panel status?

Yes. Builders and engineers can get their own login to see panel status, lift dates and sign-offs without ringing you.

How much does it cost?

It depends on what you need, so we quote up front once we understand it. No surprise invoices, no lock-in and you own what we build.

How long does it take?

We plan it in stages. Something like the panel register can be quick, so you get the first win early instead of waiting for everything at once.

Who looks after it once it's built?

We do. We host it on our own managed servers and keep it updated and secure. When you need something you ring the people who built it.

We already have systems. Can you upgrade them instead of starting again?

Usually, yes. We keep what's working and upgrade the rest in stages. We move your data across, connect the old and new while we switch and retire the old system only when the new one is proven.

Contact

Got a tilt-up contractor problem? Consider it wolloped.

Tell us what's slow, broken, manual or missing. You don't need a spec, just describe what's going on.

I've got