wollopit Got a problem? →

Waterproofing software: inspections, photos & warranties

Waterproofers: prove the membrane was right before the tiles go on. Every coat on record.

Membrane photos lost in an installer's camera roll, certificates retyped for every builder, tilers jumping the cure time and a leak claim five years later with nothing to show for it. We build inspection, certificate and warranty systems for waterproofers that keep every job's proof where you can find it, then we host them and look after them.

Looking for waterproofing inspection and warranty software?

Once the tiles are down your work is buried. The only proof you did it right is the photos, the product and batch you used, the flood test and the certificate you handed the builder. On most jobs that proof is scattered across three phones, a ute full of data sheets and a Word template somebody keeps saving over. Then a builder rings about a leaking shower in a unit you did years ago and you're digging through boxes.

Wollopit builds custom waterproofing software around how your crews actually work. Installers photograph every stage on site and the photos file themselves to the job and the area. Products, batches, coats and cure times are logged as they go. Hold points tell the builder when the tiler can start. Certificates generate from the site records in your branding and every job stays searchable by address for as long as your warranty runs. We connect to the job and accounting software you already use and look after the lot on our own servers.

01The problems

What we hear from waterproofers

Does your waterproofing company have these problems? Here's how we'd fix them.

Most waterproofers we talk to do careful work and have terrible luck proving it. The membrane was perfect. The evidence is somewhere in a phone that got dropped in a skip.

  • The problemPhotos lost in phonesMembrane, bond breaker and upturn photos sit in an installer's camera roll between the dog and the footy.
    How we fix itPhotos taken in the app and filed against the job, the unit and the wet area with the date, time and installer stamped on.
  • The problemCertificates typed by handEvery builder wants a certificate and someone in the office retypes it from a text message at night.
    How we fix itCertificates generated from the site records in your branding, ready to send the moment the job is signed off.
  • The problemTilers start too earlyThe membrane isn't inspected or cured and the tiler is already spreading glue over it.
    How we fix itHold points and cure times tracked per area. The builder and tiler get a message when it's released and not before.
  • The problemNobody knows what went onWhich membrane, which batch and how many coats? Nobody wrote it down and the bucket's long gone.
    How we fix itProducts, batch numbers, coats and dry film checks recorded per area, picked from your own product list in a couple of taps.
  • The problemFlood tests with no recordThe flood test was done and passed. There's just no time, photo or signature to prove it.
    How we fix itFlood test start and finish times, water level photos and sign-offs captured on site and attached to the certificate.
  • The problemLeak claims years laterA builder or owner rings about a leak in a job from 2021 and you spend a day hunting for anything at all.
    How we fix itEvery job searchable by address, builder or unit with the full photo trail, products and certificates in seconds.
  • The problemBuilders chasing paperworkHandover is next week and the builder wants certificates for 40 units by tomorrow.
    How we fix itA builder portal where they download certificates and photos per site or per unit whenever they need them.
  • The problemQuoting from plans is slowMeasuring wet areas, balconies and planter boxes off PDFs takes nights you don't have.
    How we fix itQuote templates by area type with your rates and products, so a bathroom, balcony or basement is priced in minutes.
  • The problemThe schedule changes dailyThe builder moves the pour, the framer runs late and crews get sent to sites that aren't ready.
    How we fix itA shared schedule with site readiness checks and SMS updates so crews only roll out when the area is ready.
  • The problemReturn visits slip throughSecond coats, top coats and repairs need another trip and nobody booked it.
    How we fix itMulti-visit jobs track each stage and book the next visit automatically once the cure time is up.
  • The problemDefects and callbacks get lostA punch list item gets mentioned on site and forgotten until the builder holds your retention.
    How we fix itDefects logged with photos, assigned to a crew and closed off with proof the builder can see.
02What we build

Solutions

What we build for waterproofers. Usually all talking to each other.

Pick the one that's hurting most or join the whole lot up. Everything is built around how your team works, not the other way round.

01

Site inspection app

Photos, products, coats and notes captured per wet area. Works offline in basements and syncs when there's signal.

02

Stage photo checklists

Prompts for prep, primer, bond breaker, upturns, puddle flanges and final coat so no shot gets missed.

03

Flood test records

Start and finish times, water level photos and sign-offs captured on site.

04

Certificate generator

Waterproofing certificates built from site data in your branding, sent to the builder in one tap.

05

Hold point tracking

Cure times and inspections tracked per area with release messages to the builder and tiler.

06

Product & batch register

Your membranes, primers and sealants with batch numbers, coats and data sheets logged per job.

07

Warranty register

Every job searchable by address, unit or builder for the life of the warranty.

08

Builder portal

Builders log in to download certificates, photos and inspection records per site or unit.

09

Quoting templates

Bathrooms, balconies, roofs, basements and planters priced from your rates and products.

10

Crew scheduling

Jobs, stages and return visits on one calendar with site readiness checks and SMS updates.

11

Defects & callbacks

Punch list items and leak callbacks logged with photos, assigned and closed with proof.

12

Licence & SWMS records

Crew licences, inductions and safe work method statements stored and checked before site.

13

A website that gets the work

Quick on mobile, shows your commercial and residential work and is built to rank for 'waterproofer near me'.

03The systems

The big ones

Every wet area, on one system.

These are the systems waterproofers ask us about most. Each one works on its own and they get properly useful when they're joined up.

Site inspections

Photograph it once. It files itself.

Installers open the job on their phone, pick the unit and the area and work through a stage checklist. Every photo lands against the right wet area with the time and installer on it. No more airdropping photos to the office at 9pm.

  • Jobs broken into units and wet areas
  • Stage checklists with required photos
  • Date, time and installer stamped on photos
  • Product and batch picked from your list
  • Coats and dry film notes per area
  • Flood test timer with photos
  • Works offline and syncs later
  • Notes and markups on photos
  • Manager review before sign-off

Certificates

Certificates that write themselves from the site.

The site records are already there, so the certificate is too. Pick the job, check it over and send it in your branding with the photos and products attached. Builders stop chasing and the office stops retyping.

  • Certificates built from site records
  • Your branding and licence details
  • Products, batches and areas listed
  • Photo appendix attached automatically
  • Bulk certificates for multi-unit sites
  • Sent by email or the builder portal
  • Signed and dated by the right person
  • Reissue a copy in seconds

Hold points

Nobody tiles until you say so.

Every area carries a hold point that stays closed until the cure time is up and the inspection is done. The builder and tiler get a message when it's released. If someone tiles over it anyway, you've got the timestamp to prove it.

  • Cure times set per product
  • Hold points per unit and area
  • Release by SMS and email
  • Builder and tiler notified together
  • Early tiling flagged and recorded
  • Return visits booked after cure
  • Site readiness checks before crews roll out
  • Calendar view across every site

Warranty register

A leak claim from 2021? Pull it up in seconds.

Every job you've ever done is searchable by address, unit, builder or product. When the phone rings about a leak you've got the photos, the batch and the certificate in front of you before the builder finishes the sentence.

  • Search by address, unit or builder
  • Full photo trail for every area
  • Products and batch numbers on record
  • Certificates and flood tests attached
  • Warranty end dates tracked
  • Callback logged against the original job
  • Export a claim pack as a PDF
  • Records kept for the life of the warranty

Builder portal

Builders help themselves to the paperwork.

Each builder gets a login with their sites, units and documents. Certificates, photos and inspection records are there when handover comes round, so your office isn't digging out 40 PDFs the night before.

  • Logins per builder and site manager
  • Sites broken into units and areas
  • Certificates and photos to download
  • Hold point status at a glance
  • Booking requests for the next stage
  • Defects raised with photos
  • Handover packs zipped in one click
  • Invoices linked from Xero or MYOB
04How it changes

Before and after

A wet area, wolloped.

Here's how a single ensuite could change. Every waterproofer runs a bit differently, so we map yours first.

Before

  1. Photos sit in someone's camera roll
  2. Nobody wrote down the batch number
  3. Flood test done with no record
  4. Tiler starts before the cure time is up
  5. Certificate typed from scratch at night
  6. Leak claim years later with no evidence

After

  1. Photos filed to the job and the area
  2. Product and batch picked in the app
  3. Flood test timed and photographed
  4. Hold point released by SMS after cure
  5. Certificate generated on site in your branding
  6. Records pulled up in seconds by address
05Services

Everything under one roof

Software, websites and systems for waterproofers.

Whether you're starting fresh or upgrading what you've got, it's one team from the first sketch to the support call.

Custom software for waterproofers

Built around how your waterproofing company actually runs: site inspection app, stage photo checklists and the admin in between, in one system you own.

Websites for waterproofers

Fast, hand-built websites that rank for the searches your customers make and turn visits into enquiries, bookings or orders.

Waterproofing company system upgrades

Running on spreadsheets, old software or a platform you've outgrown? We move your data across and upgrade in stages so the business never stops.

Apps and portals for waterproofers

Flood test records and certificate generator: customer and staff portals that work on any phone without an app store.

Integrations and automation

We connect ServiceM8, simPRO and Tradify so information moves on its own and nobody retypes it.

Hosting, support and care

Managed hosting, updates, backups and security for your waterproofing company, looked after by the people who built it.

06Integrations

Connections

Plays nicely with what you already use.

We connect to the job, accounting and building platforms you already rely on and add the inspection and warranty records around them.

  • ServiceM8
  • simPRO
  • Tradify
  • Fergus
  • AroFlo
  • Xero
  • MYOB
  • QuickBooks
  • Procore
  • Buildxact
  • Microsoft 365
  • Google Workspace
  • Dropbox
  • Deputy
  • Stripe
  • Twilio SMS
  • Google Maps
07How we work

The process

Some people dip their toe in. We turn up in a rebreather.

We get properly below the surface of your waterproofing company: the systems, the busy days and the jobs everyone hates. Then we fix the bits that matter most first.

  1. 01

    Think

    We get on site with your crews, sit in the office and look at how photos, certificates and hold points move today, then find where the proof goes missing.

  2. 02

    Archi-tech

    We plan it before writing code: your jobs, units, wet areas, products, certificates, builders, hosting and cost.

  3. 03

    Build

    Real engineering, shown to you early and often. Usually the site photo app first, so your crews stop losing evidence straight away.

  4. 04

    Look after

    We host it, maintain it and keep improving it. When something breaks you call the people who built it.

08Questions

FAQ

Things waterproofers ask us.

Something else on your mind? Ring 0423 011 252 and ask the people who'd build it.

Can it work with the job software we already use?

Usually, yes. We can connect to ServiceM8, simPRO, Tradify, Xero or MYOB so jobs and invoices stay where they are. Then we add the inspection, certificate and warranty records around them.

Do we have to switch platforms?

No. If your job management and accounting are doing their job we build around them. If something is holding you back we'll show you what replacing it would involve before anything changes.

Will the app work in a basement with no signal?

Yes. Installers can take photos and fill in records offline and everything syncs once the phone finds signal again.

Can the certificates match what our builders and licence need?

Yes. We set up your certificate templates with your licence details, wording and branding. You or your nominated person still checks and signs them off.

Can builders get the certificates and photos themselves?

Yes. Each builder gets a portal login to download certificates, photos and inspection records per site or unit and see hold point status.

How long are the records kept?

As long as you need. We host them on our own managed servers and back them up, so a job from years ago is as easy to find as one from last week.

How much does a waterproofing system cost?

It depends on what you need, so we quote up front once we understand it. No surprise invoices, no lock-in and you own what we build.

How long does it take?

Smaller pieces like the site photo app or certificate generator can be quick. Bigger systems are built in stages so you get the first win early instead of waiting for everything at once.

Who looks after it once it's built?

We do. We host it, keep it updated and secure and fix anything that goes wrong. When you need something you ring the people who built it.

We already have systems. Can you upgrade them instead of starting again?

Usually, yes. We keep what's working and upgrade the rest in stages. We move your data across, connect the old and new while we switch and retire the old system only when the new one is proven.

Contact

Got a waterproofing company problem? Consider it wolloped.

Tell us what's slow, broken, manual or missing. You don't need a spec, just describe what's going on.

I've got